Subaru Outback wheel lug torque
Last reviewed: 2026-08-29 · How we verify this data
Wheel lug torque for the Subaru Outback is 74 to 89 lbf·ft (100–121 N·m), depending on model year. This page covers 2 year ranges from 2007 to 2022, across which Outback uses 2 different torque specifications. Figures also cover 10 trim variants (Outback F4, Outback F6, Outback L.L. Bean, and others). Find the row that matches your car's year before tightening.
| Model years | lbf·ft | N·m | kgf·m | Stud / bolt |
|---|---|---|---|---|
| 2007–2022 | 89 | 121 | 12.3 | — |
| 2010 | 74 | 100 | 10.2 | — |
Frequently asked questions
What is the wheel lug torque for a Subaru Outback?
It is 74 to 89 lbf·ft (100–121 N·m) depending on model year. For 2010 the figure is 74 lbf·ft (100 N·m / 10.2 kgf·m).
Did the Outback torque specification change between model years?
The Outback torque specification changed over its production run: 74 lbf·ft applies to 2010, while 89 lbf·ft applies to 2007–2022. Using the wrong generation's figure can under- or over-tighten the wheel — match your model year exactly.
Should I grease the wheel studs on an Outback?
Torque figures apply to clean, dry threads. Do not grease, oil or anti-seize the studs unless the manufacturer explicitly calls for it — lubricant can raise clamping force well beyond the target and stretch or snap a stud.
In what order should I tighten the wheel fasteners on an Outback?
Tighten in a star (criss-cross) pattern in two or three passes, finishing with a calibrated torque wrench at the figure for your year, with the wheel on the ground. Re-check after 50–100 miles.
See all Subaru torque specifications.
Need these figures in the shop, offline? ▶ Get the free Android app