Subaru Baja wheel lug torque
Last reviewed: 2026-08-29 · How we verify this data
Wheel lug torque for the Subaru Baja is 66 to 80 lbf·ft (90–108 N·m), depending on model year. This page covers 2 year ranges from 2003 to 2006, across which Baja uses 2 different torque specifications. Figures also cover 1 trim variant (Baja F4). Find the row that matches your car's year before tightening.
| Model years | lbf·ft | N·m | kgf·m | Stud / bolt |
|---|---|---|---|---|
| 2003–2004 | 66 | 90 | 9.2 | — |
| 2006 | 80 | 108 | 11.0 | — |
Frequently asked questions
What is the wheel lug torque for a Subaru Baja?
It is 66 to 80 lbf·ft (90–108 N·m) depending on model year. For 2006 the figure is 80 lbf·ft (108 N·m / 11.0 kgf·m).
Did the Baja torque specification change between model years?
The Baja torque specification changed over its production run: 66 lbf·ft applies to 2003–2004, while 80 lbf·ft applies to 2006. Using the wrong generation's figure can under- or over-tighten the wheel — match your model year exactly.
Should I grease the wheel studs on a Baja?
Torque figures apply to clean, dry threads. Do not grease, oil or anti-seize the studs unless the manufacturer explicitly calls for it — lubricant can raise clamping force well beyond the target and stretch or snap a stud.
In what order should I tighten the wheel fasteners on a Baja?
Tighten in a star (criss-cross) pattern in two or three passes, finishing with a calibrated torque wrench at the figure for your year, with the wheel on the ground. Re-check after 50–100 miles.
See all Subaru torque specifications.
Need these figures in the shop, offline? ▶ Get the free Android app