Mazda MPV wheel lug torque
Last reviewed: 2026-08-29 · How we verify this data
Wheel lug torque for the Mazda MPV is 66 to 80 lbf·ft (90–108 N·m), depending on model year. This page covers 2 year ranges from 1990 to 2006, across which MPV uses 2 different torque specifications. Figures also cover 3 trim variants (MPV 3D Van, MPV LX-SV, MPV LXE). Find the row that matches your car's year before tightening.
| Model years | lbf·ft | N·m | kgf·m | Stud / bolt |
|---|---|---|---|---|
| 1990–1998 | 66 | 90 | 9.2 | — |
| 2000–2006 | 80 | 108 | 11.0 | — |
Frequently asked questions
What is the wheel lug torque for a Mazda MPV?
It is 66 to 80 lbf·ft (90–108 N·m) depending on model year. For 2000–2006 the figure is 80 lbf·ft (108 N·m / 11.0 kgf·m).
Did the MPV torque specification change between model years?
The MPV torque specification changed over its production run: 66 lbf·ft applies to 1990–1998, while 80 lbf·ft applies to 2000–2006. Using the wrong generation's figure can under- or over-tighten the wheel — match your model year exactly.
Should I grease the wheel studs on a MPV?
Torque figures apply to clean, dry threads. Do not grease, oil or anti-seize the studs unless the manufacturer explicitly calls for it — lubricant can raise clamping force well beyond the target and stretch or snap a stud.
In what order should I tighten the wheel fasteners on a MPV?
Tighten in a star (criss-cross) pattern in two or three passes, finishing with a calibrated torque wrench at the figure for your year, with the wheel on the ground. Re-check after 50–100 miles.
See all Mazda torque specifications.
Need these figures in the shop, offline? ▶ Get the free Android app