TIGHT-IT-UP
Lug Nuts and Bolts

Land Rover Range Rover wheel lug torque

Last reviewed: 2026-08-29 · How we verify this data

Wheel lug torque for the Land Rover Range Rover is 90 to 103 lbf·ft (122–140 N·m), depending on model year. This page covers 7 year ranges from 1990 to 2022, across which Range Rover uses 4 different torque specifications. Figures also cover 33 trim variants (Range Rover Autobiography, Range Rover Autobiography Fifty, Range Rover Classic LWB, and others). Find the row that matches your car's year before tightening.

Land Rover Range Rover torque by model year
Model yearslbf·ftN·mkgf·mStud / bolt
1990–19929012212.4
1990–19959613013.3
1994–19959012212.4
1999–20019613013.3
2003–201310314014.3
2014–20189813313.6
2019–202210314014.3

Frequently asked questions

What is the wheel lug torque for a Land Rover Range Rover?

It is 90 to 103 lbf·ft (122–140 N·m) depending on model year. For 2019–2022 the figure is 103 lbf·ft (140 N·m / 14.3 kgf·m).

Did the Range Rover torque specification change between model years?

The Range Rover torque specification changed over its production run: 4 different figures are recorded between 1990 and 2022, ranging from 90 to 103 lbf·ft. Using the wrong generation's figure can under- or over-tighten the wheel — read your model year off the table on this page rather than picking either end of the range.

Should I grease the wheel studs on a Range Rover?

Torque figures apply to clean, dry threads. Do not grease, oil or anti-seize the studs unless the manufacturer explicitly calls for it — lubricant can raise clamping force well beyond the target and stretch or snap a stud.

In what order should I tighten the wheel fasteners on a Range Rover?

Tighten in a star (criss-cross) pattern in two or three passes, finishing with a calibrated torque wrench at the figure for your year, with the wheel on the ground. Re-check after 50–100 miles.

See all Land Rover torque specifications.

Need these figures in the shop, offline? ▶ Get the free Android app