Jeep Liberty wheel lug torque
Last reviewed: 2026-08-29 · How we verify this data
Wheel lug torque for the Jeep Liberty is 85 to 95 lbf·ft (115–129 N·m), depending on model year. This page covers 5 year ranges from 2002 to 2012, across which Liberty uses 3 different torque specifications. Figures also cover 5 trim variants (Liberty 4WD DSL, Liberty 65th Anniversary, Liberty Limited Jet, and others). Recorded stud/bolt size: 1/2-20. Find the row that matches your car's year before tightening.
| Model years | lbf·ft | N·m | kgf·m | Stud / bolt |
|---|---|---|---|---|
| 2002 | 85 | 115 | 11.7 | — |
| 2002–2004 | 85 | 115 | 11.7 | 1/2-20 |
| 2005 | 85 | 115 | 11.7 | — |
| 2005 | 86 | 116 | 11.8 | — |
| 2006–2012 | 95 | 129 | 13.2 | — |
Frequently asked questions
What is the wheel lug torque for a Jeep Liberty?
It is 85 to 95 lbf·ft (115–129 N·m) depending on model year. For 2006–2012 the figure is 95 lbf·ft (129 N·m / 13.2 kgf·m).
Did the Liberty torque specification change between model years?
The Liberty torque specification changed over its production run: 3 different figures are recorded between 2002 and 2012, ranging from 85 to 95 lbf·ft. Using the wrong generation's figure can under- or over-tighten the wheel — read your model year off the table on this page rather than picking either end of the range.
Should I grease the wheel studs on a Liberty?
Torque figures apply to clean, dry threads. Do not grease, oil or anti-seize the studs unless the manufacturer explicitly calls for it — lubricant can raise clamping force well beyond the target and stretch or snap a stud.
In what order should I tighten the wheel fasteners on a Liberty?
Tighten in a star (criss-cross) pattern in two or three passes, finishing with a calibrated torque wrench at the figure for your year, with the wheel on the ground. Re-check after 50–100 miles.
See all Jeep torque specifications.
Need these figures in the shop, offline? ▶ Get the free Android app