Jaguar I-Pace wheel lug torque
Last reviewed: 2026-08-29 · How we verify this data
Wheel lug torque for the Jaguar I-Pace is 92 to 98 lbf·ft (125–133 N·m), depending on model year. This page covers 3 year ranges from 2019 to 2025, across which I-Pace uses 3 different torque specifications. Figures also cover 2 trim variants (I-Pace First, I-Pace HSE). Find the row that matches your car's year before tightening.
| Model years | lbf·ft | N·m | kgf·m | Stud / bolt |
|---|---|---|---|---|
| 2019 | 92 | 125 | 12.7 | — |
| 2021–2022 | 98 | 133 | 13.6 | — |
| 2023–2025 | 96 | 130 | 13.3 | — |
Frequently asked questions
What is the wheel lug torque for a Jaguar I-Pace?
It is 92 to 98 lbf·ft (125–133 N·m) depending on model year. For 2023–2025 the figure is 96 lbf·ft (130 N·m / 13.3 kgf·m).
Did the I-Pace torque specification change between model years?
The I-Pace torque specification changed over its production run: 3 different figures are recorded between 2019 and 2025, ranging from 92 to 98 lbf·ft. Using the wrong generation's figure can under- or over-tighten the wheel — read your model year off the table on this page rather than picking either end of the range.
Should I grease the wheel studs on an I-Pace?
Torque figures apply to clean, dry threads. Do not grease, oil or anti-seize the studs unless the manufacturer explicitly calls for it — lubricant can raise clamping force well beyond the target and stretch or snap a stud.
In what order should I tighten the wheel fasteners on an I-Pace?
Tighten in a star (criss-cross) pattern in two or three passes, finishing with a calibrated torque wrench at the figure for your year, with the wheel on the ground. Re-check after 50–100 miles.
See all Jaguar torque specifications.
Need these figures in the shop, offline? ▶ Get the free Android app