Honda Passport wheel lug torque
Last reviewed: 2026-08-29 · How we verify this data
Wheel lug torque for the Honda Passport is 65 to 94 lbf·ft (88–127 N·m), depending on model year. This page covers 2 year ranges from 1994 to 2022, across which Passport uses 2 different torque specifications. Figures also cover 7 trim variants (Passport EX 2WD V6, Passport EX 4WD V6, Passport EX-L, and others). Find the row that matches your car's year before tightening.
| Model years | lbf·ft | N·m | kgf·m | Stud / bolt |
|---|---|---|---|---|
| 1994–2002 | 65 | 88 | 9.0 | — |
| 2019–2022 | 94 | 127 | 13.0 | — |
Frequently asked questions
What is the wheel lug torque for a Honda Passport?
It is 65 to 94 lbf·ft (88–127 N·m) depending on model year. For 2019–2022 the figure is 94 lbf·ft (127 N·m / 13.0 kgf·m).
Did the Passport torque specification change between model years?
The Passport torque specification changed over its production run: 65 lbf·ft applies to 1994–2002, while 94 lbf·ft applies to 2019–2022. Using the wrong generation's figure can under- or over-tighten the wheel — match your model year exactly.
Should I grease the wheel studs on a Passport?
Torque figures apply to clean, dry threads. Do not grease, oil or anti-seize the studs unless the manufacturer explicitly calls for it — lubricant can raise clamping force well beyond the target and stretch or snap a stud.
In what order should I tighten the wheel fasteners on a Passport?
Tighten in a star (criss-cross) pattern in two or three passes, finishing with a calibrated torque wrench at the figure for your year, with the wheel on the ground. Re-check after 50–100 miles.
See all Honda torque specifications.
Need these figures in the shop, offline? ▶ Get the free Android app