Dodge and Ram RAM 2500 Truck wheel lug torque
Last reviewed: 2026-08-29 · How we verify this data
Wheel lug torque for the Dodge and Ram RAM 2500 Truck is 140 to 148 lbf·ft (190–200 N·m), depending on model year. This page covers 2 year ranges from 2009 to 2011, across which RAM 2500 Truck uses 2 different torque specifications. Figures also cover 2 trim variants (RAM 2500 Truck 2WD DSL, RAM 2500 Truck 4WD DSL). Recorded stud/bolt size: 9/16-18. Find the row that matches your car's year before tightening.
| Model years | lbf·ft | N·m | kgf·m | Stud / bolt |
|---|---|---|---|---|
| 2009–2011 | 148 | 200 | 20.4 | 9/16-18 |
| 2010 | 140 | 190 | 19.4 | 9/16-18 |
Frequently asked questions
What is the wheel lug torque for a Dodge and Ram RAM 2500 Truck?
It is 140 to 148 lbf·ft (190–200 N·m) depending on model year. For 2010 the figure is 140 lbf·ft (190 N·m / 19.4 kgf·m).
Did the RAM 2500 Truck torque specification change between model years?
The RAM 2500 Truck torque specification changed over its production run: 140 lbf·ft applies to 2010, while 148 lbf·ft applies to 2009–2011. Using the wrong generation's figure can under- or over-tighten the wheel — match your model year exactly.
Should I grease the wheel studs on a RAM 2500 Truck?
Torque figures apply to clean, dry threads. Do not grease, oil or anti-seize the studs unless the manufacturer explicitly calls for it — lubricant can raise clamping force well beyond the target and stretch or snap a stud.
In what order should I tighten the wheel fasteners on a RAM 2500 Truck?
Tighten in a star (criss-cross) pattern in two or three passes, finishing with a calibrated torque wrench at the figure for your year, with the wheel on the ground. Re-check after 50–100 miles.
See all Dodge and Ram torque specifications.
Need these figures in the shop, offline? ▶ Get the free Android app