Dodge and Ram Durango wheel lug torque
Last reviewed: 2026-08-29 · How we verify this data
Wheel lug torque for the Dodge and Ram Durango is 85 to 135 lbf·ft (115–183 N·m), depending on model year. This page covers 5 year ranges from 1998 to 2022, across which Durango uses 3 different torque specifications. Figures also cover 12 trim variants (Durango 2WD LDC, Durango 4WD LDC, Durango Citadel, and others). Recorded stud/bolt size: 1/2-20, M14x1.5. Find the row that matches your car's year before tightening.
| Model years | lbf·ft | N·m | kgf·m | Stud / bolt |
|---|---|---|---|---|
| 1998–2002 | 85 | 115 | 11.7 | — |
| 2002 | 85 | 115 | 11.7 | 1/2-20 |
| 2009 | 135 | 183 | 18.7 | — |
| 2016 | 130 | 176 | 17.9 | M14x1.5 |
| 2019–2022 | 130 | 176 | 17.9 | M14x1.5 |
Frequently asked questions
What is the wheel lug torque for a Dodge and Ram Durango?
It is 85 to 135 lbf·ft (115–183 N·m) depending on model year. For 2019–2022 the figure is 130 lbf·ft (176 N·m / 17.9 kgf·m).
Did the Durango torque specification change between model years?
The Durango torque specification changed over its production run: 3 different figures are recorded between 1998 and 2022, ranging from 85 to 135 lbf·ft. Using the wrong generation's figure can under- or over-tighten the wheel — read your model year off the table on this page rather than picking either end of the range.
Should I grease the wheel studs on a Durango?
Torque figures apply to clean, dry threads. Do not grease, oil or anti-seize the studs unless the manufacturer explicitly calls for it — lubricant can raise clamping force well beyond the target and stretch or snap a stud.
In what order should I tighten the wheel fasteners on a Durango?
Tighten in a star (criss-cross) pattern in two or three passes, finishing with a calibrated torque wrench at the figure for your year, with the wheel on the ground. Re-check after 50–100 miles.
See all Dodge and Ram torque specifications.
Need these figures in the shop, offline? ▶ Get the free Android app