Dodge and Ram Avenger wheel lug torque
Last reviewed: 2026-08-29 · How we verify this data
Wheel lug torque for the Dodge and Ram Avenger is 65 to 100 lbf·ft (88–136 N·m), depending on model year. This page covers 3 year ranges from 1997 to 2012, across which Avenger uses 3 different torque specifications. Figures also cover 2 trim variants (Avenger R/T, Avenger SXT). Find the row that matches your car's year before tightening.
| Model years | lbf·ft | N·m | kgf·m | Stud / bolt |
|---|---|---|---|---|
| 1997–1998 | 89 | 120 | 12.2 | — |
| 2000 | 65 | 88 | 9.0 | — |
| 2008–2012 | 100 | 136 | 13.9 | — |
Frequently asked questions
What is the wheel lug torque for a Dodge and Ram Avenger?
It is 65 to 100 lbf·ft (88–136 N·m) depending on model year. For 2008–2012 the figure is 100 lbf·ft (136 N·m / 13.9 kgf·m).
Did the Avenger torque specification change between model years?
The Avenger torque specification changed over its production run: 3 different figures are recorded between 1997 and 2012, ranging from 65 to 100 lbf·ft. Using the wrong generation's figure can under- or over-tighten the wheel — read your model year off the table on this page rather than picking either end of the range.
Should I grease the wheel studs on an Avenger?
Torque figures apply to clean, dry threads. Do not grease, oil or anti-seize the studs unless the manufacturer explicitly calls for it — lubricant can raise clamping force well beyond the target and stretch or snap a stud.
In what order should I tighten the wheel fasteners on an Avenger?
Tighten in a star (criss-cross) pattern in two or three passes, finishing with a calibrated torque wrench at the figure for your year, with the wheel on the ground. Re-check after 50–100 miles.
See all Dodge and Ram torque specifications.
Need these figures in the shop, offline? ▶ Get the free Android app