Chevrolet Impala wheel lug torque
Last reviewed: 2026-08-29 · How we verify this data
Wheel lug torque for the Chevrolet Impala is 100 to 111 lbf·ft (136–150 N·m), depending on model year. This page covers 5 year ranges from 1995 to 2020, across which Impala uses 4 different torque specifications. Figures also cover 5 trim variants (Impala 50th Anniversary, Impala Eco, Impala Limited Police, and others). Find the row that matches your car's year before tightening.
| Model years | lbf·ft | N·m | kgf·m | Stud / bolt |
|---|---|---|---|---|
| 1995–1996 | 103 | 140 | 14.3 | — |
| 2000–2001 | 100 | 136 | 13.9 | — |
| 2006–2012 | 103 | 140 | 14.3 | — |
| 2014–2020 | 110 | 149 | 15.2 | — |
| 2015–2016 | 111 | 150 | 15.3 | — |
Frequently asked questions
What is the wheel lug torque for a Chevrolet Impala?
It is 100 to 111 lbf·ft (136–150 N·m) depending on model year. For 2015–2016 the figure is 111 lbf·ft (150 N·m / 15.3 kgf·m).
Did the Impala torque specification change between model years?
The Impala torque specification changed over its production run: 4 different figures are recorded between 1995 and 2020, ranging from 100 to 111 lbf·ft. Using the wrong generation's figure can under- or over-tighten the wheel — read your model year off the table on this page rather than picking either end of the range.
Should I grease the wheel studs on an Impala?
Torque figures apply to clean, dry threads. Do not grease, oil or anti-seize the studs unless the manufacturer explicitly calls for it — lubricant can raise clamping force well beyond the target and stretch or snap a stud.
In what order should I tighten the wheel fasteners on an Impala?
Tighten in a star (criss-cross) pattern in two or three passes, finishing with a calibrated torque wrench at the figure for your year, with the wheel on the ground. Re-check after 50–100 miles.
See all Chevrolet torque specifications.
Need these figures in the shop, offline? ▶ Get the free Android app