Cadillac ATS wheel lug torque
Last reviewed: 2026-08-29 · How we verify this data
Wheel lug torque for the Cadillac ATS is 103 to 140 lbf·ft (140–190 N·m), depending on model year. This page covers 2 year ranges from 2013 to 2019, across which ATS uses 2 different torque specifications. Figures also cover 2 trim variants (ATS Performance, ATS Premium Performance). Find the row that matches your car's year before tightening.
| Model years | lbf·ft | N·m | kgf·m | Stud / bolt |
|---|---|---|---|---|
| 2013–2015 | 103 | 140 | 14.3 | — |
| 2016–2019 | 140 | 190 | 19.4 | — |
Frequently asked questions
What is the wheel lug torque for a Cadillac ATS?
It is 103 to 140 lbf·ft (140–190 N·m) depending on model year. For 2016–2019 the figure is 140 lbf·ft (190 N·m / 19.4 kgf·m).
Did the ATS torque specification change between model years?
The ATS torque specification changed over its production run: 103 lbf·ft applies to 2013–2015, while 140 lbf·ft applies to 2016–2019. Using the wrong generation's figure can under- or over-tighten the wheel — match your model year exactly.
Should I grease the wheel studs on an ATS?
Torque figures apply to clean, dry threads. Do not grease, oil or anti-seize the studs unless the manufacturer explicitly calls for it — lubricant can raise clamping force well beyond the target and stretch or snap a stud.
In what order should I tighten the wheel fasteners on an ATS?
Tighten in a star (criss-cross) pattern in two or three passes, finishing with a calibrated torque wrench at the figure for your year, with the wheel on the ground. Re-check after 50–100 miles.
See all Cadillac torque specifications.
Need these figures in the shop, offline? ▶ Get the free Android app